MERIHelp center

Create and use add-ons

Follow the numbered arrows. Click a screenshot to enlarge it.

1Create the sample here

Click: Theme settings → Add-ons → Sample product → Select → Create product

Create the sample here
  1. 1ClickSelect
  2. 2ClickCreate product
1.1 Create the sample here
View step-by-step instructions
  1. Click Theme settings → Add-ons → Sample product → Select.
  2. Click Create product.

2Fill in the sample

Fill in the sample
  1. 1EnterTitle: Sample productTitle: Add-on sample
  2. 2UploadMedia
  3. 3SelectStatus: Unlisted
2.1 Fill in the sample

↓ Scroll down in the same form.

Fill in the sample
  1. 4AddTags: MeAero-Accessory
  2. 5OptionalTheme template: meaero-accessory
  3. 6EnterPrice
2.2 Fill in the sample
View step-by-step instructions
  1. In Title, enter Sample product.
  2. Under Media, click Upload new. Select an image and upload it.
  3. In Status, select Unlisted.
  4. In Tags, type MeAero-Accessory and press Enter to add it. The first time a store creates an add-on, the tag is not in the list yet; after that, pick it from the list (any letter case works). Add-ons duplicated from the sample keep the tag.
  5. Theme template is optional: the MeAero-Accessory tag alone shows the add-on page.
  6. In Price, enter 0.

3Turn off inventory tracking and shipping

↓ Scroll down in the same form.

Turn off inventory tracking and shipping
  1. 1Turn offInventory tracked
  2. 2Turn offPhysical product
3.1 Turn off inventory tracking and shipping

These are sample settings. Review inventory and shipping for each actual add-on.

View step-by-step instructions
  1. Turn off Inventory tracked.
  2. Turn off Physical product.
  3. These settings apply to the reusable sample. After duplicating it, configure inventory tracking and shipping for the actual add-on you sell.

4Save the product, then select the sample

Add product

Save the product, then select the sample
  1. 1ClickSave
4.1 Save the product, then select the sample

Theme settings → Add-ons

Save the product, then select the sample
  1. 2SelectSample product
  2. 3ClickSave
4.2 Save the product, then select the sample
View step-by-step instructions
  1. Click Save at the top right of the product window. Once saved, click Close.
  2. Back in the theme editor, click Select under Sample product and choose the sample you just saved.
  3. Click Save at the top right of the theme editor.

5Open the library and duplicate

Open add-on library → Sample product → More actions → Duplicate product

Open the library and duplicate
  1. 1ClickMore actions
  2. 2ClickDuplicate product
5.1 Open the library and duplicate
Open the library and duplicate
  1. 3EnterTitle: Add-onTitle: Wig add-on
  2. 4Keep checkedMedia
  3. 5SelectSet as unlisted
  4. 6ClickDuplicate product
5.2 Open the library and duplicate

Keep Media checked to copy the sample image.

View step-by-step instructions
  1. Click Open add-on library, open your sample product, and scroll to the top. Click More actions.
  2. Click Duplicate product.
  3. In Title, enter the add-on name, such as Add-on.
  4. Check Media.
  5. In Product status, select Set as unlisted.
  6. Click Duplicate product.

6Finish the new add-on

Finish the new add-on
  1. 1EnterTitle
  2. 2UploadMedia
6.1 Finish the new add-on

↓ Scroll down in the same form.

Finish the new add-on
  1. 3EnterPrice
  2. 4ClickSave
6.2 Finish the new add-on

Change the title, price and image. Review inventory and shipping, then Save.

View step-by-step instructions
  1. In Title, enter the add-on name, such as Add-on.
  2. Under Media, click Upload new. Select an image and upload it.
  3. In Price, enter this add-on’s actual selling price.
  4. Before saving, review inventory tracking and shipping for this actual add-on. Shipped accessories need the appropriate shipping details.
  5. Click Save to save the add-on product.

7Add the add-on to a product page

Click: Products → Product → Option set

Product → Option set

Add the add-on to a product page
  1. 1Turn onEnable
  2. 2SelectApply to products
  3. 3Or selectApply to collections
7.1 Add the add-on to a product page
Add the add-on to a product page
  1. 4EnterGroup heading
  2. 5ClickAdd add-ons (Multiple selection): SelectAdd add-ons: Select
  3. 6SelectSelection mode
7.2 Add the add-on to a product page
Add the add-on to a product page
  1. 7SelectSelection mode
  2. 8Turn on if neededRequired
7.3 Add the add-on to a product page

Add add-ons (Multiple selection) → Select

Add the add-on to a product page
  1. 9EnterSearch: MeAero-Accessory
  2. 10SelectAdd-onOptional accessory
7.4 Add the add-on to a product page

Theme editor

Add the add-on to a product page
  1. 11ClickSave
7.5 Add the add-on to a product page
View step-by-step instructions
  1. At the top of the theme editor, select Products and your product template. Under Product, open or add an Option set. Turn on Enable.
  2. Click Select under Apply to products and choose the main products that should show these add-ons.
  3. Or click Select under Apply to collections and choose the collections that should show these add-ons.
  4. Open or add an Options group. In Group heading, enter the group name customers will see.
  5. Optional: in Description, add a note customers see from the question mark next to the group heading (a mouse points at it; a finger taps it). Use bold, italic, underline, links, paragraphs and bullet lists, and set Description text color, Emphasis color (bold text, links and bullets) and Description text size.
  6. Selection mode: Single choice / Multiple choices / Image single choice / Image multiple choice / Dropdown (pop-up list) / Image single choice (one card per variant). In Single choice and Multiple choices, an add-on whose product has its own Description in your Shopify admin also shows a question mark next to its name: customers point at it or tap it to read that description in the same kind of window (videos and embedded content are left out), and pressing the question mark never selects the add-on. Dropdown (pop-up list) shows a single box: pressing it lists the add-ons in a pop-up like the region and language selector, with each add-on’s variants under its name and unavailable add-ons greyed out with the reason. The box then shows the chosen add-on’s small picture, name and price, and a question mark beside the box opens its own Description.
  7. Image single choice and Image multiple choice arrange the pictures to fit the width (up to three per row on phones; four make two rows of two) and show an add-on’s name when customers point at or tap its picture. An add-on without a product image shows its name only: in a list where other add-ons have pictures it keeps the picture’s space so the names line up, an image card shows the name in the picture’s place, and the cart shows the name only.
  8. Required is up to you: turn it on only if customers must choose an item in this group before adding to cart; otherwise leave it off. Preview the item prices and group subtotal before publishing. If customers add to cart or press Buy it now without choosing, the page glides to this group, which shakes and gets a thin red frame until a choice is made. While the add-ons are incomplete, the Buy it now button stays visible but faded, and pressing it shows the same reminder.
  9. Click Add add-ons (Multiple selection) → Select.
  10. In Search, enter MeAero-Accessory. Only add-ons are listed; you can copy the word from the note under Add add-ons (Multiple selection).
  11. Select the add-ons you need.
  12. Optional: under Mutual exclusion settings, put add-ons that cannot be chosen together in Group A and Group B. Once customers choose from one side, the other side is locked until they clear it. Both sides stay open until customers choose. If a choice leaves a required group with nothing to choose, its add-ons say they cannot be combined, and add to cart asks for another combination. The chosen add-on that causes it and the emptied group both get a red frame until the combination is changed.
  13. Optional: under Trigger settings, add-ons in Dependent add-ons (unlocked by a trigger) stay visible but locked until customers choose any add-on in Trigger add-ons (choose first); a ! note says what to choose first, and clearing every trigger clears and locks them again.
  14. Click Save at the top right of the theme editor.
  15. If a picker already contains a selection, click Change to edit it.

8One image card per variant · 3.0.4

Assign a matching image to each variant
Assign a matching image to each variant
View step-by-step instructions
  1. In an Options group, set Selection mode to Image single choice (one card per variant). Each card represents one variant, with its own image, variant details, price and availability. Shoppers can choose one variant; unavailable variants cannot be selected.
  2. Assign the matching image to each variant in Shopify. Without a variant image, the product’s main image is used. The limit remains 50 variants per add-on product.
  3. Example: Meri Compact Keyboard has Graphite, Cloud and Sand variants at $79 each. The computer-accessory artwork is AI-generated demonstration material; products and prices are examples.

9Reveal follow-up groups after a choice

No keyboard selected: children hidden, additional total $0
No keyboard selected: children hidden, additional total $0
Keyboard selected: follow-up choices visible, additional total $111
Keyboard selected: follow-up choices visible, additional total $111
View step-by-step instructions
  1. A follow-up group is an Options group nested inside a parent Options group. The parent must use a single-choice mode, and only one child level is supported.
  2. Before a keyboard is selected, Palm rest and USB-C cable stay hidden. Select a keyboard to reveal both groups. Clearing the parent clears and hides the children; hidden choices add no price or cart items and do not count as required.
  3. The keyboard is optional. USB-C cable is required only when its group is visible after a keyboard choice; this does not make the keyboard mandatory for the main product. Keyboard $79 + palm rest $20 + cable $12 = $111 additional total.

10Keep cart companions with their parent

Cart companions appear beneath their keyboard
Cart companions appear beneath their keyboard
View step-by-step instructions
  1. Items selected in follow-up groups appear beneath the selected parent add-on, with a Goes with label. Removing the keyboard also removes its palm rest and cable.
  2. The optional palm rest can be removed separately. The required cable has no independent Remove control; shoppers can still remove the parent keyboard and all its companions together.
  3. An Option set’s Trigger settings control availability and do not create this cart relationship. Pairing here comes from nested follow-up groups.
  4. This screenshot also includes earlier cart items in its subtotal. The whole-cart subtotal is not the example’s $111 additional total.

11Set up a follow-up group — eight steps

Prepare the add-on product and images
Prepare the add-on product and images

Configuration diagram — not a theme-editor screenshot. The child blocks belong inside Keyboard.

  • Product
    • Option set · Desk setup — 3.0.4 guide
      • Options group · Keyboard · Required: —
        • Palm rest · Required: —
        • USB-C cable · Required: ✓
View step-by-step instructions
  1. Prepare Keyboard, Palm rest and USB-C cable add-on products. Add the MeAero-Accessory tag, use the meaero-accessory template, set valid prices and inventory, and make them available to Online Store. Use Unlisted for add-on-only products. Assign each variant its matching image and save.
  2. Open Online Store → Themes → Edit theme. Select the product template and preview the main product, Meri Form Compact Desktop.
  3. Under Product, add or open an Option set. Turn on Enable. Enter Desk setup — 3.0.4 guide in Set name and select the desktop in Apply to products. An empty scope applies to no products.
  4. Use an Options group inside this set. Enter Keyboard in Group heading and choose Meri Compact Keyboard in Add add-ons (Multiple selection). Set Selection mode to Image single choice (one card per variant). Leave Required off. Remove unused empty groups from the new set if needed.
  5. Expand Keyboard in the block list. Use Add block inside Keyboard to add an Options group. Check that it is indented inside Keyboard, rather than beside it.
  6. Name this child Palm rest and choose Meri Palm Rest. Add another direct child of Keyboard named USB-C cable and choose Meri USB-C Cable. Both children use Image single choice (one card per variant). The two child groups are at the same level.
  7. Leave Required off for Palm rest and turn it on for USB-C cable. It applies only while the child is visible. Do not add another level inside either child. This example uses a square Picture frame shape and Fit side by side for Choice arrangement in all three groups.
  8. Click Save. Test: children hidden before a keyboard choice; visible after selection; required cable enforced only then; children cleared when the parent is cleared; $111 additional total with all three selected; correct Goes with placement and linked removal in the cart.

12Edit, unlink and troubleshoot

View step-by-step instructions
  1. To change a price or image: open the add-on library → open the add-on → edit Price or Media → click Save.
  2. To remove an add-on from a group: return to the theme editor → open that Options group → remove the add-on from the selection → save the theme.
  3. If an add-on is missing: add the MeAero-Accessory tag in its product settings, check its sales status and Online Store channel, save, then search again in the group.
  4. The selected sample product is excluded from customer choices. If an add-on is unavailable, check that it has an available variant, is not subscription-only and has no more than 50 variants.
Shopify reference ↗